Jenteram Syn AE

Advanced Lubricant for Gas Turbine Engines
JENTERAM SYN AE is a lubricating oil with a viscosity of 5 cSt at 100°C. It is based on polyol esters with high thermal stability, fortified with technically proven anti-oxidant, anti-wear and anti-corrosion additives.
JENTERAM SYN AE has been developed for the increased demands of the latest technological development in gas turbine engines. It has demonstrated an excellent thermal and oxidation stability, with no coke or deposit formation in the hot parts of the gas turbine such as the high pressure turbine bearing, scavenge or vent lines.
Customer Benefits
  • Remarkable savings in maintenance costs and down time
  • Excellent lubricity protection at high operating temperatures
  • Excellent wear protection
  • Superior thermal and oxidation stability
  • Low evaporation loss
Find out what the PETRONAS Fluid Technology SolutionsTM can do for your business

Applications JENTERAM SYN AE is designed for use in military and civil aircraft gas turbine engines and in stationary industrial applications.

JENTERAM SYN AE is highly recommended and validated for use on the following industrial gas turbines :
  • Rolls-Royce - All marks of RB 211 and AVON, Olympus, Tyne, Spey for industrial & marine applications.
  • Allison/Rolls Royce 501 K (all models)
  • General Electric - LM 500, LM1600, LM2500 & LM2500+, LM5000, LM6000, LMS 100
  • Turbomeca – Makila TI
  • All SOLAR gas turbines (meets SOLAR ES 9-224 Class III)
Specifications
  • MIL-PRF-23699 F Class STD
Packaging
  • 208 Liters Drum
Product Typicals
Characteristics Unit Typical Results Limit * Test Method
Kinematic viscosity at mm 2/s (cSt) ASTM D 445
100°C 5.12 4.90 - 5.40
40°C 25.6 min. 23.0
-40°C 9468 max. 13000
Low temperature stability % FTM-S-791-3458
72 h at - 40°C - 0.7 max. ± 6
Flash point, COC °C 270 min. 246 ASTM D 92
Pour point °C - 57 max -54 ASTM D 97
Acid number mgKOH/g 0.16 max. 1.00 SAE ARP 5088
Evaporation loss ASTM D 972
6 h 30 min at 204 °C
Mass fraction % 3.4 max. 10.0
Foaming characteristics ASTM D 892
Foam volume ml
Sequence I at 24 °C
5 minutes aeration 10 max. 25
1 minute settling 0 0
Sequence II at 93.5 °C
5 minutes aeration 5 max. 25
1 minute settling 0 0
Sequence III at 24 °C after 93.5 °C
5 minutes aeration 0 max. 25
1 minute settling 0 0
* MIL-PRF-23699 F Class STD


Rate This Article
Did you find this useful or informative?